Best EOT Crane Manufacturers in Pune 2026 - WSP

About EOT Crane

As EOT Crane or Electric Overhead Travel Crane is operational on rail mounted high on structure buildings. It applies electricity in movements and raising of materials in factories or workshops. The cranes consist of the bridge, which travels over the rails, and has a hoist and a trolley to manage the crane accurately. These are appropriate in indoor areas that have low space. EOT Cranes increase work rate and decrease manual labor. Our cranes aid our operations in crazed hubs where heavy activities occur on a day-to-day basis.

Working Principle of EOT Crane

An Electric Overhead Traveling (EOT) crane operates through an electric motor to drive three separate movements; hoisting (vertical), cross-travel (lateral), and long-travel (longitudinal) movements by a pendant or radio remote. It moves heavy loads by hooking them to a hoist, moving them over a bridge girder, as the entire bridge is moved on runway beams.

Types of EOT Cranes Manufactured in Pune

We provide a wide selection of Electric Overhead Traveling (EOT) Cranes, commonly referred to as Bridge Cranes or Overhead Cranes, as a top EOT Crane manufacturer in Pune. These cranes are made to satisfy the material handling needs of various industries. Our cranes are designed to operate safely, precisely, and with excellent performance in manufacturing plants, warehouses, fabrication units, and heavy industrial facilities.

• Single Girder Eot Cranes: For light to medium-duty material handling applications, our Single Girder EOT Cranes are the perfect choice. These overhead bridge cranes have spans of up to 50 meters, lifting heights of up to 30 meters, and load capacities ranging from 1 to 15 tons. These cranes are frequently utilized in manufacturing facilities, warehouses, engineering workshops, and assembly units where effective lifting is crucial because of their smooth operation, low maintenance requirements, and economical performance.
• Double Girder Eot Cranes: Our Double Girder EOT Cranes are designed for demanding industrial applications that call for continuous operation and heavy lifting. These heavy-duty bridge cranes offer remarkable strength, accuracy, and dependability, with capacities ranging from 2 to 100 tons, spans of up to 50 meters, and lifting heights of 30 meters. When high-capacity material handling is needed, they are frequently utilized in steel plants, power plants, heavy engineering industries, shipyards, foundries, and fabrication workshops.
• Underslung (Underhung) EOT Crane: Rather than being supported by floor-mounted columns, the Underslung EOT Crane, also called an Underhung Overhead Crane, is suspended straight from the roof structure. This design makes effective use of the headroom that is available while optimizing floor space. It offers smooth and effective material movement, making it a great option for factories, workshops, and production facilities with constrained floor plans or building heights.
• Gantry (Goliath) Crane: Our Gantry Crane, also known as a Goliath Crane or Portal Crane, uses ground-mounted rails instead of elevated runway beams. When installing an overhead runway system is not feasible, these adaptable cranes can be used both indoors and outdoors. Construction sites, shipyards, railroad workshops, precast yards, warehouses, and open storage spaces all make extensive use of them to handle heavy machinery and materials.
• Semi-Gantry Crane: The benefits of both gantry and overhead cranes are combined in a semi-gantry crane. The crane runs on a floor-mounted rail on one side and an elevated runway beam on the other. For facilities with limited space or specialized production layouts, this configuration maximizes available workspace and provides a cost-effective material handling solution. It is frequently installed in manufacturing facilities, fabrication units, and workshops.
• Explosion-Proof EOT Crane: Our Explosion Resistant EOT Cranes are specifically made for dangerous industrial settings that may contain flammable gases, vapors, dust, or combustible materials. These hazardous area overhead cranes guarantee dependable and safe lifting operations thanks to their flameproof electrical components, spark resistant motors, and safety certified mechanisms. Chemical plants, paint manufacturing facilities, oil and gas facilities, pharmaceutical industries, and other explosive environments all make extensive use of them.
• Grab Bucket and Magnet Crane: For effective bulk material and metal handling applications, we produce specialized Grab Bucket Cranes and Magnet Cranes. While Electromagnetic Magnet Cranes are specifically made to handle ferrous materials like steel plates, billets, pipes, and scrap metal, Grab Bucket EOT Cranes are perfect for lifting and moving materials like coal, sand, scrap, grains, minerals, and waste. Steel plants, foundries, recycling facilities, ports, and bulk material handling industries all benefit from these industrial material handling cranes' increased operational efficiency.

Single Girder Eot Crane

Double Girder Eot Crane

Under Slung Eot Crane

Technical Specifications of EOT Crane

We've added below a specialized table of EOT Crane in Pune that provides further technical specification information.

Main Parts and Usage of EOT Crane:

An EOT Crane consists of several essential components that ensure smooth and efficient material handling operations. Designed and engineered by leading EOT Crane Manufacturers in India, these cranes are widely used across industries for lifting and transporting heavy loads with precision.<.p>

• Bridge Girder (Main Girder): This is the main horizontal structure that goes across the width of the bay and under which the trolley and hoist go to allow cross-travel.
• End Carriages/Trucks: These are found at each end of the bridge and they are used to move the entire crane along the longitudinal runway rails.
• Hoist: This is the mechanism of lifting (motor, rope drum, wire rope, and hook) that will be used in raising and lowering the loads vertically.
• Trolley: Travels horizontally across the bridge, transporting the hoist to the lateral position of the load.
• Runway Rails: These rails are attached on the structure of the building and ensure the longitudinal motion of the bridge.
• Control System (Pendant/Radio Remote): This is the interface (pendants or wireless remotes) that operators need in order to operate the crane remotely.
• Electrical Panel/Festoon System: This supplies power to motor and controls, with Festoon systems giving the trolley which is moving flexible power supply.
• Limit Switches: These are safety devices, which will not allow the hoist or trolley to travel farther than it should.

Features of EOT Crane

• Structure & Design: Single or double girder configurations available.
• Operational Control: Smooth acceleration and deceleration via Variable Frequency Drives (VFD).
• Safety Systems: Equipped with overload protection.
• Performance: High-duty cycle capability with robust.
• Customization: Customize to meet specific facility needs.

Benefits of EOT Crane

We as EOT Crane suppliers in Pune, we provided different benefits according requirement which are given below.

• Increased Efficiency: EOT Cranes accelerate material flow within the factories. As EOT Crane reduced the waiting period during loading and unloading.
• Better Safety: The manual lifting risks are reduced by these cranes. EOT Crane is done by built-in features that prevent overloads and provide constant control.
• Space Savings: These take up overhead areas, with floors available to other machines. It is a good layout in a busy workshop.
• Cost Effectiveness: EOT Cranes are long lasting requiring minimal maintenance. These save on labor expenses in the long run.
• Precise Control: Movement of loads is done by operators at the right point. Fluid movements do not cause damages of goods.

Applications of EOT Crane

As a trusted EOT Crane exporter based in Pune, we manufacture and supply high-quality Electric Overhead Traveling (EOT) Cranes, also known as Overhead Cranes, Bridge Cranes, and Industrial Material Handling Cranes, for a wide range of industries. Our advanced lifting solutions are designed to improve productivity, enhance workplace safety, and ensure efficient material handling in demanding industrial environments.

• Manufacturing & Assembly: Our EOT cranes are widely used in manufacturing and assembly plants for lifting, moving, and accurately positioning heavy machinery, engines, dies, components, and raw materials. These overhead bridge cranes play a vital role in automotive, engineering, machinery manufacturing, and industrial production facilities by ensuring smooth and efficient workflow.
• Steel Plants & Foundry: Our heavy-duty EOT cranes are designed to handle steel coils, billets, ingots, plates, castings, and molten metal with precision and safety. These industrial lifting cranes support continuous material handling operations in steel plants, foundries, rolling mills, and metal processing industries.
• Warehousing & Logistics: Our overhead material handling systems help warehouses and distribution centers efficiently organize, store, load, and unload heavy goods. These bridge cranes improve operational efficiency, optimize storage space, and reduce manual handling, making them ideal for modern logistics facilities.
• Power Plants: Our industrial overhead cranes are used for the installation, maintenance, and servicing of heavy equipment such as turbines, transformers, generators, and other critical machinery. They provide safe and precise lifting solutions for thermal, hydroelectric, and renewable energy facilities.
• Infrastructure & Construction: Our EOT cranes and gantry cranes are ideal for lifting and transporting heavy construction materials, including precast concrete components, structural steel beams, girders, and fabricated sections. These cranes help improve productivity and safety across infrastructure and construction projects.
• Ports & Shipbuilding: Our bridge cranes and gantry cranes are extensively used in ports, shipyards, and marine industries for loading and unloading cargo, transporting heavy ship components, and supporting shipbuilding and maintenance operations. Their robust construction ensures reliable performance in demanding environments.
• Petrochemical & Chemical Industries: Our explosion-proof EOT cranes are specifically designed for hazardous industrial environments. They safely handle chemical containers, reactor vessels, storage tanks, process equipment, and heavy industrial components while meeting stringent safety standards required in petrochemical and chemical plants.
• Railway Workshops: Our workshop cranes and overhead lifting equipment are widely used in railway workshops and maintenance depots for lifting and transporting locomotives, railway coaches, bogies, wheelsets, and heavy machinery. These cranes support efficient repair, maintenance, and assembly operations while ensuring safe material handling.

Installation Process of EOT Crane

• Pre- Installation and Site Assessment: Check the structure of the building, runway beams, and clearance.
• Installation of runway & rails: The beam of the runway and the crane rails to be installed should be placed and fitted so that they maintain the correct span and level.
• Set the main girder (s): end carriages on the ground (with supports/cradles).
• Fit the trolley/hoist mechanism onto the girder.
• Attach the end carriages to the main girder through high strength bolts.
• Testing and Commissioning: Check all fasteners to be torqued.

Why Choose WSP Cranes as Your EOT Crane Manufacturer?

• Specialization: We specialize in the production of EOT Cranes and therefore quality is not compromised.
• Experience: Experience of more than 11 years translates to reliable designs to suit you.
• Certification: Key certificates attest to the fact that our cranes comply with the best safety regulations.
• Trusted Brands: Our brands are trusted and made to endure in arduous applications.
• Stable Delivery: Delivery of supply to all major cities in a fast and stable manner.
• Custom Engineering: Custom fits guarantees that your cranes fit your workshop.

Click on WSP Cranes & Services, a reputable provider, manufacturer, and exporter of EOT cranes in Pune. Visit our one-stop shop in Pune to learn about the strength of EOT Cranes. Our tested cranes are able to grow more quickly, hoist more loads, and operate more intelligently. Every unit we construct is backed by the greatest certifications and years of trust. These are brilliant in every sector, from shipping to steel. Choose us to supply us with daily cranes. Use a powerful overhead to improve your actions today. Work together with WSP Crane's quality-driven leaders. For further information, get in touch with us.

FAQs