EOT Crane Manufacturers in Nagpur, Suppliers and Exporters in Nagpur

About EOT Crane

As EOT Crane or Electric Overhead Travel Crane is operational on rail mounted high on structure buildings. It applies electricity in movements and raising of materials in factories or workshops. The cranesconsist of the bridge, which travels over the rails, and has a hoist and a trolley to manage the crane accurately. These are appropriate in indoor areas that have low space. EOT Cranes increase work rate and decrease manual labor. Our cranes aid our operations in crazed hubs where heavy activities occur on a day-to-day basis.

Working Principle of EOT Crane

An Electric Overhead Traveling (EOT) crane operates through an electric motor to drive three separate movements; hoisting (vertical), cross-travel (lateral), and long-travel (longitudinal) movements by a pendant or radio remote. It moves heavy loads by hooking them to a hoist, moving them over a bridge girder, as the entire bridge is moved on runway beams.

Types of EOT Crane

As EOT Crane manufacturers in Nagpur, according to efficiency and reliability we provided different types which are given below.

• Single Girder Eot Cranes: Single Girder EOT Crane with a load capacity of between 1 ton to 15 tons, a span of up to 50 meters and a lifting height of up to 30 meters, which is aimed at providing efficiency and reliability in various industrial settings. These cranes are designed with great precision and These are very common in manufacturing plants.
• Double Girder Eot Cranes: The range of capacity of Double Girder EOT Cranes is 2t to 100t, span of up to 50 meters, and lifting height of up to 30 meters. EOT Crane is designed with heavy duty operations, where These are engineered to provide precision, efficiency and longevity.
• Underslung (Underhung) EOT Crane: The crane is not mounted on columns but directly on the roof structure, which occupies the maximum available floor space and is the best used in facilities with limited headroom.
• Gantry/Goliath Crane: This crane is put on its tracks and moves on the ground level or the floor and is flexible to use outdoors or in the construction works or in the building where a bridge structure is incapable of supporting it.
• Semi-Gantry Crane: This has both in one end of the bridge a raised runway and the other end on a rail mounted on a floor, which is more space-saving in a particular industrial setting.
• Explosion-Proof EOT Crane: Special purpose cranes, used in potentially hazardous environments (e.g., chemical plants, paint shops) to avoid sparks, which may have special motors and components that are impervious to sparks.
• Grab Bucket/magnet crane: Special EOT cranes are used to work with bulk products (with the help of a grab) or metallic products (with the help of an electromagnetic hoist).

Technical Specifications of EOT Crane

We've added below a specialized table of EOT Crane in Nagpur that provides further technical specification information.

Main Parts of EOT Crane

• Bridge Structure: This bridge has its main girder over the bay; end carriages have wheels to move over the runway.
• Trolley (Crab): Crosses bridge girder; hoist EOT Crane.
• Hoist Mechanism: Motor, gearbox, drum, hook block wire rope/chain to lift off/lower loads.
• Electrical Controls: Panel, pendent/radio remote, power on: DSL busbars.
• Safety: Limit switches prevent over-travel; bumpers plunge forward.

Features of EOT Crane

• Structure & Design: Single or double girder configurations available.
• Operational Control: Smooth acceleration and deceleration via Variable Frequency Drives (VFD).
• Safety Systems: Equipped with overload protection.
• Performance: High-duty cycle capability with robust.
• Customization: Customize to meet specific facility needs.

Benefits of EOT Crane

We as EOT Crane suppliers in Nagpur, we provided different benefits according requirement which are given below.

• Increased Efficiency: EOT Cranes accelerate material flow within the factories. As EOT Crane reduced the waiting period during loading and unloading.
• Better Safety: The manual lifting risks are reduced by these cranes. EOT Crane is done by built-in features that prevent overloads and provide constant control.
• Space Savings: These take up overhead areas, with floors available to other machines. It is a good layout in a busy workshop.
• Cost Effectiveness: EOT Cranes are long lasting requiring minimal maintenance. These save on labor expenses in the long run.
• Precise Control: Movement of loads is done by operators at the right point. Fluid movements do not cause damages of goods.

Applications of EOT Crane

We serve as EOT Crane exporters in Nagpur; it is applicable in different sites which are given below.

• Steel Plants and Foundry: Play an important role in the transportation of the raw material, ingots, billets, plates, and molten metal involved in the process of production.
• Warehousing and Logistics: Support the effective arrangement, warehousing, loading, and offloading heavy and bulky commodities in both warehouses and distribution centers.
• Power Plants: The power plants are used in the installation and repair of heavy machinery which includes generators, turbines and transformers.
• Construction & Infrastructure: It is used to move heavy construction materials such as steel beams, girders and concrete parts.
• Shipbuilding & Ports: This is necessary to transport bulky parts, unloading/loading cargo, and transportation of materials in shipyards.
• Petrochemical & Chemical Industries: These are used to transport and safely treat heavy containers, chemicals and reactor vessels.
• Railway Workshops: These are used to transport and repair railway carriages and heavy machinery.
• Manufacturing & Assembly: This is used in the automobile, machinery and high engineering industries to transfer, lift and place heavy parts, engines and raw material in assembly lines.

Installation Process of EOT Crane

• Pre- Installation and Site Assessment: Check the structure of the building, runway beams, and clearance.
• Installation of runway & rails: The beam of the runway and the crane rails to be installed should be placed and fitted so that they maintain the correct span and level.
• Set the main girder (s): end carriages on the ground (with supports/cradles).
• Fit the trolley/hoist mechanism onto the girder.
• Attach the end carriages to the main girder through high strength bolts.
• Testing and Commissioning: Check all fasteners to be torqued.

Why Choose WSP Cranes as Your EOT Crane Manufacturer?

• We specialize in the production of EOT Cranes and therefore quality is not compromised.
• Experience of more than 15 years translates to reliable designs to suit you.
• Key certificates attest to the fact that our cranes comply with the best safety regulations.
• Our brands are trusted and made to endure in arduous applications.
• Delivery of supply to all major cities in a fast and stable manner.
• Custom fits guarantees that your cranes fit your workshop.

WSP Cranes & Services is well-known EOT Crane manufacturers in Nagpur, suppliers and exporters in Nagpur. Find out the strength of EOT Cranes at your one-stop makers in Nagpur. Our proven cranes can lift heavier, work smarter and grow faster. Every unit that we build is supported by years of trust and best certificates. These are bright in every industry, starting with steel to shipping. Select us to provide us with day after day cranes. Enhance your activities today with strong overhead. Collaborate with quality-driven leaders WSP Crane. Contact us for more details.

FAQs